Friendly Fires Wood Stove 6″ Chimney Kit – Flat Ceiling

USD $1,521.63USD $2,435.13

Clear

Product Description

Friendly Fires offers basic 6″ Chimney Kits for Flat Ceiling Installations. These kits include both smoke pipe and chimney pipe.

There are two kits available distinguished by whether you are doing a One Story Install (no living space above ceiling- chimney right to roof); or a Two Story Install (living space above ceiling- chimney goes through living space before penetrating the roof)

PLEASE READ

  • These kits assume that you have a standard 8′ ceilings and medium pitched roof . These kits may not cover everything that you need as each install is unique (ie. different ceiling heights/roof pitches), but it will contain the essential components required for either a One Story or Two Story Installation. 
  • Once an order is placed, a Friendly Fires representative will contact you to ensure you have everything required for your specific installation. Alternatively, contact us if you have any questions or concerns. 

3-2-10 Rule (Important) 

  • This rule means that your chimney needs to be at least 3 feet above the roof penetration, and its top has to be 2 feet higher than any part of the building that’s within 10 feet.
  • You may need to add additional chimney lengths (see bottom of page) depending on the pitch of your roof, and the amount of space in the attic between ceiling and roofline.

**Important Note: Flashings are NOT included in either kit. If you require a flashing  please visit this page to order one. **

The One Story Installation Kit Includes: 

  • 1- Stove Adapter
  • 1- 40″-68″Adjustable Length (smoke pipe)
  • 1- Square Support Box
  • 1- 48″ Chimney Length
  • 1- 24″ Chimney Length
  • 1- Attic Radiation Shield
  • 1- Roof Support
  • 1- Storm Collar (5″ Wide)
  • 1- Set of Pole Braces
  • 1- Deluxe Rain Cap

The Two  Story Installation Kit Includes: 

  • 1- Stove Adapter
  • 1- 40″-68″Adjustable Length (smoke pipe)
  • 1- Square Support Box
  • 3- 48″ Chimney Lengths
  • 1- 24″ Chimney Length
  • 1- Chimney Radiation Shield (Chimney passing through a living space must be insulated/wrapped with this shield- extends up to 11′)
  • 1- Attic Radiation Shield
  • 1- Roof Support
  • 1- Storm Collar (5″ Wide)
  • 1- Set of Pole Braces
  • 1- Deluxe Rain Cap

Further Customization

The kits contain the basic pieces required for a standard install. Please check your stoves manual for proper venting layout and restrictions- because each install is unique, there is the possibility you may require additional offsets or lengths.

Smoke Pipe (Stove Pipe)

  • Smoke pipe runs from the top of the stove until it reaches the chimney that penetrates the wall or ceiling.  You may need additional lengths and/or elbows to suit your specific installation needs.

Chimney Pipe

  • Chimney pipes run through the interior of the house from the room that the stove is in, through the attic then penetrates the roof (vertical); or through the wall and up along the side of the house and up past the roof (up & out). You may require additional lengths and/or elbows to suit your specific installation needs.

 

Shipping Dimensions

Weight 40 lbs
Dimensions 24 × 24 × 24 in
Install Type?

One Story, Two Story

Reviews

There are no reviews yet.

Be the first to review “Friendly Fires Wood Stove 6″ Chimney Kit – Flat Ceiling”

Your email address will not be published.

You may also like…