Sale!

ICC Stainless Steel Single Wall Tee

USD $81.75USD $89.58

Clear

Shipping rate calculated in the Cart before payment.
For more information please click here.

SKU: N/A Categories: , Tags: ,

Product Description

This is the official ICC Stainless Steel Single Wall Tee. It ships new in its original packaging, it is not an aftermarket equivalent. Friendly Fires stocks all pellet venting components you may require to vent your pellet appliance into a pre-existing wood chimney.

Part Description

  • This Stainless Steel Tee from ICC Chimney is a high quality ultra-safe venting part.  This stainless steel ‘T’ is most commonly used when connecting a stainless steel flex liner to rigid venting or as a takeoff on a pellet insert fireplace inside a masonry cavity.  Along with this part, you may require a dripless connector and stainless steel liner.
  • Friendly Fires likes this ‘T’ because of its durability and the adjustable removable snout allowing you to easily connect to your pellet venting (or other) on the horizontal breach of your chimney.

ICC Stainless Steel Single Wall Tee Part Numbers:

  • 3PATF4: 4″ x 4″ x 3″ Snout
  • 4PATF4: 4″ x 4″ x 4″ Snout

If you would like some assistance in ensuring you have all the correct components, please contact us.

Installation Tips:  Attach the vertical part of the ‘T’ to the end of your stainless steel flex liner and drop the liner down the masonry chimney.  A second person will stand at the chimney breach and connect the snout of the ‘T’ – which is conveniently attached from the inside of the liner.

ICC EXCEL Pellet Technical Information – why pay more?

Certification: ICC EXCELPellet has been tested and listed to UL 641 and ULC S609 by Intertek Testing Services.

Allowable Flue Gas Temperatures: ICC Excel Pellet has been tested to withstand 927°C (1700 °F).

ICC Excel Pellet Construction:

  • Flue: .016″ laser welded stainless steel.
  • Casing: .019″ laser welded Galvalume steel or .019″ laser
  • welded satin coat steel (painted)
  • Paint: Forrest “Stove Bright” flat black.
  • Insulation: 3/8″ Air Space
  • Gasket: Silicone Rubber

EXCELPellet Engineering and Design Considerations

  • We suggest that your pellet system be designed with a vertical rise. This is not a requirement but will help the stove to vent combustion products in the case of a power failure.
  • Keeping the horizontal run and number of elbows to a minimum will reduce the cost of your installation and improve performance.  Although not required we recommend that terminations be installed 12″ away from the wall to reduce the potential for smoke stain on outside walls. Refer to your stove manual for exact dimensions.
  • Do not install a vent smaller in diameter than the flue outlet on the stove.
  • EXCELPellet must be installed according to the installation instructions. EXCELPellet is manufactured using specialized machinery which makes it possible to maintain strict tolerances between components. This precision permits the use of a factory installed silicone gasket and eliminates the need for field application of silicone.  This unique factory installed silicone rubber gasket solves two major pellet venting problems:
  • The gasket seals perfectly so there is no need for sealant application in the field. This speeds up installation, simplifies clean up, facilitates painting and eliminates callbacks.
  • Not only do all parts assemble easily, they can be disassembled and reassembled just as easily making routine maintenance much easier. EXCELPellet has a smooth attractive Galvalume steel exterior. Galvalume is corrosion resistant and requires very little preparation for painting.

 

 

 

 

Shipping Dimensions

Weight N/A
Dimensions N/A
Length

3" Stainless Tee, 4" Stainless Tee

Reviews

There are no reviews yet.

Be the first to review “ICC Stainless Steel Single Wall Tee”

Your email address will not be published.

You may also like…