This is the official Flame Shield for Summit Series of Pacific Energy freestanding wood stoves – Series B. This is a Pacific Energy Fireplaces official factory replacement part. This flame shield fits newer Pacific Energy Summit Series Stoves (see below) as well as the PE FP30 Wood Fireplace.
Part Number: 80000393 (replaced old part number SUMB.31155 in 2019). Please Note – this part is not the same as PE Part Number SUMM.31155.
Applicable Models: Pacific Energy Summit Series B Wood Stoves, PE Summit Classic Series B Wood Stoves, PE Alderlea T6 Series B Wood Stoves, and PE FP30 Wood Fireplaces (serial numbers below).
- PE Summit & Summit Classic from serial number 440,003 to present
- PE Alderlea T6 – from serial number 440,003 to present
Please check your manual for the correct part number (it changed around 2017 -2018).
Purpose: The flame shield is a replaceable part. In the older models it was mild steel, and Pacific Energy made the change to stainless steel a few years ago. The purpose of the shield is to take the “wear and tare” of the heat going around the stainless steel baffle. If it is damaged, cracked or deteriorating in any way, they should be replaced.
Installation tips: This flame shield has three holes for the bolt to go through, depending on the vintage of your Pacific Energy Stove, you may use only one of the holes, or two of the holes. It will take some time and patience.
This flame shield fits Pacific Energy Summit WOOD STOVES.
If you have a Pacific Energy Summit WOOD INSERT – the flame shield is different (see part number SINS.35135).