This is the door gasket kit for older Pacific Energy Super Series and Summit wood burning appliances (see picture of Super 27/Spectrum door example). This is the exact kit provided by the manufacturer Pacific Energy. It measures 1/2″ x 5.5′.
Part Number: WODC.DGKIT / 80000667
- Super 27, Spectrum and Spectrum Classic wood burning stoves and mid sized wood burning inserts. For the free standing stoves, this gasket kit is for serial numbers between 55,000 and 154,000. For inserts it is for serial number between 24,001 to 36,001 (check the part number, it may work in other Pacific Energy wood burning fireplaces as well.
- Summit Wood Stoves and Inserts built ~2003 or before
Purpose: The gasket ensures a tight seal between the door and the body of the stove.
Installation tips: Remove the old gasket and clean the channel on the door (using a wire brush works really well). Then place the new gasket in the channel – make sure the two end of the gasket meet on the hinge side of the door. Close the door and let the gasket seal to the door.
Other Notes: This gasket, is the same gasket that Pacific Energy uses when they make their stoves. It is a graphite gasket. Most manufacturers say that, the graphite gasket is more durable and it will last longer compared to the regular white gasket found at the mass merchants.
Important: Although this gasket comes with a “sticky” side it is usually not “sticky” enough to hold the gasket in place after repeated use. We highly recommend that you purchase the Fireplace and Stove Gasket Cement as well.
Note: Wood stove and fireplace door gaskets are also commonly referred to as “Door Sealers” (Asbestos style rope that goes around the door channel).