Sale!

Selkirk EnergyVent SuperVent Increasers

Spend over $350 and receive a free Friendly Fires Cap automatically!

USD $67.85USD $87.86

Clear

Shipping rate calculated in the Cart before payment.
For more information please click here.

SKU: N/A Categories: ,

Product Description

These are official OEM venting parts from Selkirk Corporation (see consumer brand names below).  These are pellet increasers that allow PL Pellet Pipe to be increased from 3″ to 4″ Inside Diameter.  Many customers report that their pellet stove functions better when the vent pipe is increased by 1″.

Selkirk Part Numbers

  • PL34IN – Long Increaser: Increases the pellet pipe from 3″ to 4″ with a 7″ length (ie – a gradual increase)
  • PL34INS – Short Increaser: Increases the pellet pipe from 3″ to 4″ with a 2″ length (ie – a short increase)

About Selkirk PL Pipe (=EnergyVent = SuperVent Pellet Pipe)

  • Usage: Venting pellet burning stoves approved for use with PL-Vent (gases must not exceed 570 F or 298.80 C)
  • Available Sizes: 3″ & 4″ Inside Diameter
  • Materials: Case – GalvalumeT AZ 150; Liner – Type 304 – Stainless Steel; Collar – Aluminized
  • Listing: Listed to ULC S609, ULC/ORD C441 and UL 641
  • Features and Benefits: 1″ clearance to combustibles; Sturdy collars for snug fit; approved with 45 elbow termination and collar with screen.

About Selkirk Branding:  Selkirk has made different brands of pellet vent chimney over the years.  The EnergyVent pellet venting was commonly referred to as PL Pipe, Selkirk Pellet Pipe, EnergyVent, and recently SuperVent Pellet Pipe.  This is all the same pellet pipe chimney.

If you would like to know more to ensure you are purchasing the correct brand of Selkirk pellet venting, please see below.

Selkirk EnergyVent SuperVent Pellet Pipe Catalogue

Selkirk Direct Temp Pellet Pipe Pellet Pipe Manual

Pellet Venting Installation Tips:

  1. The manufacturer recommends using high temperature silicone and / or foil tape at every joint in order to prevent ash and air leakage.
  2. If you would the pellet pipe inside your home to be black, consider painting it with high temperature paint.
  3. Some pellet experts mention that when a pellet vent pipe increases from 3″ to 4″ and / or has a vertical rise (including past the roof) – a pellet stove operates cleaner and more efficiently.
  4. Because the exhaust of a pellet stove is often off-center, some customers will angle the first part (45 degree and / or Tee) so that the vertical rise appears in the middle of the pellet stove instead of off to one side for cosmetic reasons.

These Selkirk Energy Vent Increasers are in stock and are ready to ship.

Shipping Dimensions

Weight N/A
Dimensions N/A
Pellet Pipe Size

3-4" Increaser Short, 3-4" Increaser Long

Reviews

There are no reviews yet.

Be the first to review “Selkirk EnergyVent SuperVent Increasers”

Your email address will not be published. Required fields are marked *

You may also like…