Selkirk EnergyVent SuperVent 45 Degree Elbow

USD $87.27USD $93.99


Shipping rate calculated in the Cart before payment.
For more information please click here.

SKU: N/A Categories: ,

Product Description

These are official genuine parts from Selkirk Corporation.  These are 45 degree elbows that will allow the pellet pipe to be angled anywhere in the system – either indoor or outdoor.  These are genuine OEM Selkirk EnergyVent SuperVent Pellet Chimney Elbows.

Part Numbers:

  • PL345: Selkirk PL Pipe 3″.  This part is a 45 degree elbow in 3″ inside diameter
  • PL445: Selkirk PL Pile 4″.  This part is a 45 degree elbow 4″ inside diameter

To note: You can not match (line up) different brands of pellet venting – they will not work together.

About Selkirk PL Pipe (EnergyVent / SuperVent):

  • Usage: Venting pellet burning stoves approved for use with PL-Vent (gases must not exceed 570 F or 298.80 C)
  • Available Sizes: 3″ & 4″ Inside Diameter
  • Materials: Case – GalvalumeT AZ 150; Liner – Type 304 – Stainless Steel; Collar – Aluminized
  • Listing: Listed to ULC S609, ULC/ORD C441 and UL 641
  • Features and Benefits: 1″ clearance to combustibles; Sturdy collars for snug fit; approved with 45 elbow termination and collar with screen.

About Selkirk Branding:  Selkirk has made different brands of pellet vent chimney over the years.  The EnergyVent pellet venting was commonly referred to as PL Pipe, Selkirk Pellet Pipe, EnergyVent, and recently SuperVent.  This is all the same pellet pipe chimney.

If you would like to know more to ensure you are purchasing the correct brand of Selkirk pellet venting, please click here.

Selkirk EnergyVent SuperVent Pellet Pipe Catalogue

Selkirk Direct Temp Pellet Pipe Pellet Pipe Manual


Pellet Venting Installation Tips:

  1. The manufacturer recommends using high temperature silicone and / or foil tape at every joint in order to prevent ash and air leakage.
  2. If you would the pellet pipe inside your home to be black, consider painting it with high temperature paint.
  3. Some pellet experts mention that when a pellet vent pipe increases from 3″ to 4″ and / or has a vertical rise (including past the roof) – a pellet stove operates cleaner and more efficiently.
  4. Because the exhaust of a pellet stove is often off-center, some customers will angle the first part (45 degree and / or Tee) so that the vertical rise appears in the middle of the pellet stove instead of off to one side for cosmetic reasons.


If your required part is not listed on our website, we apologyze.  Please contact us and we will source it for you.


Shipping Dimensions

Weight N/A
Dimensions N/A

3" x 45 Degree Elbow, 4" x 45 Degree Elbow


There are no reviews yet.

Be the first to review “Selkirk EnergyVent SuperVent 45 Degree Elbow”

Your email address will not be published. Required fields are marked *

You may also like…